PaperGloss Screen printing inks for paper and board are high gloss display inks, suitable for a wide variety of display uses. These inks exhibit good strength and mileage with excellent printability and rub resistance.
PaperGloss are rapid drying and dry in seconds in a jet dryer.
PaperGloss inks should be thinned with up to 40% Papergloss thinner A3-91. Papergloss retarder A3-92 should be used for improved screen stability. Solvents can be blended to obtain desired drying speeds.
Most types of display paper & boards are suitable, as well as enameled metals, foil and hardboards. It is advisable to check the inks performance on the particular batch of substrate before starting a print run.
An estimated coverage of approximately 40-50 m2/kg can be expected, depending on conditions, if the normal reducer and mesh recommendations are followed.